PELTOR X4 HEADBAND (SLIM) 33dB
Jump to:
PELTOR X4 HEADBAND (SLIM) 33dB
Jump to:
- design and protection all come together in this ground-breaking earmuff line. The X4A utilizes a newly designed spacer
- The X-Series earmuffs are 3Ms latest advancement in hearing conservation. New technologies in comfort
- Earcup pivot points tilt for optimum comfort and efficiency
- lower-profile earmuff helps with compatibility with other personal protective equipment and is designed for protection against moderate-to-high level industrial noise and other loud sounds. It features an electrically insulated wire headband
- Noise Reduction Rating (NRR)b 27 dB. CSA Class AL. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as dielectric. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties
- often referred to as dielectric
- specially formulated foam liners and innovative ear cushions to help improve attenuation. This lightweight
- the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided
- the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment
- The wire headband offers consistent pressure over prolonged wearing periods
No questions have been asked about this product.
- The X-Series earmuffs are 3
- M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X4
- A utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. This lightweight, lower-profile earmuff helps with compatibility with other personal protective equipment and is designed for protection against moderate-to-high level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".
- The wire headband offers consistent pressure over prolonged wearing periods.
- Earcup pivot points tilt for optimum comfort and efficiency.
- Noise Reduction Rating (NRR)b 27 d
- B. CSA Class AL. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2m
- A when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3
- M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided
- EN 352:2020 SNR 33
| Attenuation Rating (HML) dB | 36/30/22 |
|---|---|
| Colour | Green |
| Ear Defender Colour | High Visibility Green/Black |
| Form | Ear Defender |
| Material | ABS/TPU Cups |
| OEM | X4A |
| Retail Pack Size | 1 |
| Returns Allowed |
Chargeable
|
| SNR Rating | 33dB |
| Type | Ear Defenders |
| Weight | 410g |
Pack size: 1
£44.28
inc VAT
RRP
£82.08
save
46%
off
£36.90
ex VAT
£36.90
ex VAT
RRP
£68.40
save
46%
off
£44.28
inc VAT
Buy more, save more
| 5+ price | £35.95 ex VAT £43.14 inc VAT | -2.57% |
| 10+ price | £35.10 ex VAT £42.12 inc VAT | -4.88% |
| 25+ price | £33.50 ex VAT £40.20 inc VAT | -9.21% |
10 In Stock
Delivery Information
Orders < £25 - 72hr Delivery Mon - Fri (£6.95 ex vat£8.34 inc vat)
Orders > £25 - 48hr Delivery Mon - Fri (£5.95 ex vat£6.54 inc vat)
Charge applies to AOS Workwear Supplies items only (one charge per order).
Orders > £25 - 48hr Delivery Mon - Fri (£5.95 ex vat£6.54 inc vat)
Charge applies to AOS Workwear Supplies items only (one charge per order).
Returns Information
Returns - Restocking Fee Applies
Returns - Restocking Fee Applies
For AOS Furniture Supplies or items shipped directly from the manufacturer, a 35% restocking fee applies, with a minimum charge of £25 +VAT. For Workwear Supplies, the restocking fee is 25%, with a minimum charge of £5.95 +VAT. All returned goods must be unused, unassembled, and in their original packaging. Business machines and electrical items can only be returned if the packaging is unopened. Additional terms apply to dated products please refer to our full returns information for details.
Please see our returns information for full terms.
No questions have been asked about this product.
- The X-Series earmuffs are 3
- M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X4
- A utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. This lightweight, lower-profile earmuff helps with compatibility with other personal protective equipment and is designed for protection against moderate-to-high level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".
- The wire headband offers consistent pressure over prolonged wearing periods.
- Earcup pivot points tilt for optimum comfort and efficiency.
- Noise Reduction Rating (NRR)b 27 d
- B. CSA Class AL. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2m
- A when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3
- M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided
- EN 352:2020 SNR 33
- design and protection all come together in this ground-breaking earmuff line. The X4A utilizes a newly designed spacer
- The X-Series earmuffs are 3Ms latest advancement in hearing conservation. New technologies in comfort
- Earcup pivot points tilt for optimum comfort and efficiency
- lower-profile earmuff helps with compatibility with other personal protective equipment and is designed for protection against moderate-to-high level industrial noise and other loud sounds. It features an electrically insulated wire headband
- Noise Reduction Rating (NRR)b 27 dB. CSA Class AL. NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as dielectric. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties
- often referred to as dielectric
- specially formulated foam liners and innovative ear cushions to help improve attenuation. This lightweight
- the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested. The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided
- the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment
- The wire headband offers consistent pressure over prolonged wearing periods
| Attenuation Rating (HML) dB | 36/30/22 |
|---|---|
| Colour | Green |
| Ear Defender Colour | High Visibility Green/Black |
| Form | Ear Defender |
| Material | ABS/TPU Cups |
| OEM | X4A |
| Retail Pack Size | 1 |
| Returns Allowed |
Chargeable
|
| SNR Rating | 33dB |
| Type | Ear Defenders |
| Weight | 410g |
Alternative Products
From
£31.26
inc VAT
From
£26.05
ex VAT
From
£10.92
inc VAT
From
£9.10
ex VAT
10 In Stock
From
£13.80
inc VAT
From
£11.50
ex VAT
500 In Stock
From
£32.34
inc VAT
From
£26.95
ex VAT
10 In Stock
From
£14.04
inc VAT
From
£11.70
ex VAT
10 In Stock
From
£15.72
inc VAT
From
£13.10
ex VAT
From
£36.36
inc VAT
From
£30.30
ex VAT
10 In Stock
From
£21.12
inc VAT
From
£17.60
ex VAT
100 In Stock
From
£4.42
inc VAT
From
£3.68
ex VAT
Backorder
From
£29.34
inc VAT
From
£24.45
ex VAT
200 In Stock
From
£30.42
inc VAT
From
£25.35
ex VAT
10 In Stock
From
£28.32
inc VAT
From
£23.60
ex VAT
200 In Stock
From
£19.62
inc VAT
From
£16.35
ex VAT
100 In Stock
From
£23.94
inc VAT
From
£19.95
ex VAT
200 In Stock
From
£3.79
inc VAT
From
£3.16
ex VAT
1000 In Stock

