This MyCafe Nylon Wire Shelf 5 Tier Static Unit is perfect for a number of different workplaces, to be placed within coldrooms, wet areas, dishwash and linen/laundry areas. With nylon coated wire shelves and nylon coated grooved posts, the shelving system also features plastic tapered assembly collars. Shelving instructions: STEP 1: Remove all provided packaging from the shelves and posts. STEP 2: Determine the position of the lowest shelf. it is recommended that a 150mm clearance from the floor is left to allow for cleaning. if units are to be mobile please see note below the assembly instructions. STEP 3: Snap on one half of the plastic collar onto the post (with the thick end down). snap on the remaining half of the collar and slide up or down until secured into the desired grove. repeat this for all four posts. STEP 4: Standing the shelf up on its longest side, insert each post from the bottom of the shelf until all of the shelves are in position. STEP 5: Carefully return the unit into the upright position. do not 'knock down' the shelf until all of the shelves are in position. STEP 6: Repeat steps 2, 3, 4 and 5 for the remaining shelves. STEP 7: With a rubber mallet 'knock down' the shelves until they are completely secured. STEP 8: The foot of each pole can be adjusted to compensate for uneven floor surfaces. To clean this product, use warm soapy water with a non-abrasive damp cloth. Ensure any excess water is wiped dry.