AOS Workwear Supplies
Arc Flash Clothing & Arc-Rated Workwear
Arc-rated workwear for your team. Practical support for your next order.
Explore arc flash coveralls, trousers, tops, thermals and hi-vis clothing for electrical maintenance, utilities and industrial teams.
Order online or ask AOS for a quotation against your approved PPE specification, with mixed sizes and quantities for your team.
Coveralls
Hi-vis workwear
Product images illustrate the range. Check the rating and specification of your selected garment.
12 clothing and equipment categories.
Ask about bespoke pricing for regular requirements.
Talk through quantities, sizes and supply options.
Find your workwear
Shop arc flash clothing by type
Choose a garment type below to browse the available products and sizes. Compare each item’s declared arc performance and any additional protection required by your site.
Suits & coveralls
One-piece workwear; compare fit, coverage and the stated arc rating.
Shop suits & coveralls
Arc flash trousers
Choose waist and leg sizes to work with your specified upper-body protection.
Shop arc flash trousers
Arc flash polo shirts
Long-sleeve workwear for a coordinated team clothing programme.
Shop arc flash polo shirts
Arc flash sweatshirts
Compare warmer garments for your approved clothing system.
Shop arc flash sweatshirts
Arc flash T-shirts
Check sleeve length, rating and whether the garment is an outer or base layer.
Shop arc flash T-shirts
Thermals & base layers
Underlayers for use within a specified, compatible clothing system.
Shop thermals & base layers
Hi-vis jackets
Check both arc protection and the required high-visibility classification.
Shop hi-vis jackets
Hi-vis trousers
Compare visible workwear options and the certification of each garment.
Shop hi-vis trousers
Hi-vis polo shirts
High-visibility tops for teams with both visibility and thermal requirements.
Shop hi-vis polo shirts
Hi-vis sweatshirts
Warmer hi-vis tops; confirm compatibility with your other layers.
Shop hi-vis sweatshirts
Hi-vis suits & coveralls
One-piece options with garment-specific visibility and arc performance.
Shop hi-vis suits & coveralls
Harnesses & lanyards
Specialist equipment for work-at-height requirements involving arc hazards.
Shop harnesses & lanyardsUnderstand the protection
What is arc flash clothing?
Arc flash clothing is protective workwear tested for the thermal hazards of an electrical arc. It is intended to reduce burn injury from the heat released during an arc flash. The protection provided depends on the garment or tested clothing system, its rating, condition and correct use.
Arc-rated is not the same as ordinary FR
Flame-resistant clothing resists ignition and flame spread under specified tests. An FR label alone does not establish an electrical arc rating. Look for the relevant arc standard and declared performance on the garment documentation.
Similarly, hi-vis colour, antistatic properties or a welding standard do not, by themselves, demonstrate arc protection.
Thermal protection is not electrical insulation
Arc-rated clothing does not establish protection against electric shock. It also does not provide complete protection against every consequence of an arc event, such as pressure, noise or flying debris.
Your task assessment must address the full set of hazards and any additional compatible PPE.
Read the garment label
Arc flash clothing standards and ratings explained
Labels may show several different results. Identify which test and performance measure your specification requires; numbers from different methods are not interchangeable.
| Marking or term | What it tells you | Buying check |
|---|---|---|
| EN / IEC 61482-2 | Requirements for clothing protecting against the thermal hazards of an electric arc. | Read the exact standard edition, declared results and manufacturer’s instructions. |
| Open arc test IEC 61482-1-1 |
Produces ELIM, ATPV and/or EBT results, commonly expressed in cal/cm². | Match the specified measure and required performance, not just a prominent number. |
| ELIM | Incident Energy Limit: a test-derived energy limit based on responses below the defined burn and breakopen criteria. | Do not treat this laboratory result as a guarantee that injury cannot occur. |
| ATPV | Arc Thermal Performance Value: the incident energy associated with a 50% probability of heat transfer reaching the second-degree-burn criterion in the test. | Use the declared value for the actual garment or approved system. |
| EBT / EBT50 | Breakopen Threshold Energy: the incident energy associated with a 50% probability of material breakopen in the test. | Check which limiting result the manufacturer declares. |
| APC 1 / APC 2 IEC 61482-1-2 |
Arc Protection Classes from a constrained-arc box test. These are distinct from open-arc energy ratings. | APC 2 is not the same as CAT 2, and APC classes cannot be directly converted to cal/cm². |
cal/cm² means calories per square centimetre: energy per unit area. It is not a voltage rating.
Looking for CAT 2 arc flash clothing?
Check which category scheme your specification uses. NFPA 70E PPE categories are part of a US framework; they are not a simple UK list of “low”, “medium” and “high” risk jobs. Do not assume CAT 2 is suitable for every electrician or industrial task. Send AOS the required standard and performance so suitable product options can be identified.
From specification to order
How to choose arc flash clothing for your team
- 01
Confirm the requirement
Obtain your employer’s approved PPE specification from the competent person responsible for electrical safety. Include the required arc performance and any visibility, weather or other requirements.
- 02
Compare the complete outfit
Check garment documentation, coverage, compatible layers, fastenings and size charts. Include head, face, hand and other protection where the assessment requires it.
- 03
Order for every wearer
Build a size-and-quantity list, include changes for laundering and agree how replacements will be ordered. Keep the product references and supporting documentation with your purchasing records.
Coveralls or separate tops and trousers?
Coveralls offer a one-piece clothing format. Separates let you choose top and trouser sizes independently and replace garments individually. Either approach needs the required coverage and performance.
Check coverage during bending and reaching, and the overlap between garments. A rated top does not establish the protection of the trousers worn with it.
Need hi-vis or multi-hazard workwear?
Hi-vis arc flash garments can address more than one requirement, but inspect each item’s certification. Check EN ISO 20471 where high visibility is required and any additional standards specified for your work.
Do not assume every colour, size or garment combination provides the same visibility class or protective performance.
Comfort, coverage and compatibility
Layering arc flash clothing, thermals and outerwear
Use tested combinations
A base layer, top and outer garment can form a clothing system, but its combined rating must come from appropriate test evidence for that combination. Do not add individual arc ratings together.
Ask for the manufacturer’s approved layering information and follow the specified order of wear. Avoid substituting an apparently similar garment without confirmation.
Shop arc flash thermalsChoose layers that work together
Check underclothing, rainwear, hi-vis vests and accessories against the system requirements. An ordinary outer layer can undermine the intended protection; an arc-rated garment underneath does not make any jacket suitable.
Fit must allow movement without excessive looseness. Follow the manufacturer’s instructions for sleeves, closures and garment coverage.
Shop arc flash hi-vis jacketsWhere fall protection is required, select the harness, lanyard and clothing together with a competent person. An arc-related claim does not replace checking fall-protection suitability, compatibility and inspection requirements.
Where is arc flash workwear used?
Arc flash clothing may be specified for tasks in electricity distribution, utilities, industrial maintenance, facilities engineering and electrical contracting. The requirement comes from the equipment, task and assessed exposure—not simply a job title or the supply voltage.
Maintenance and engineering teams
Plan consistent approved garments, practical sizing and replacements for teams working across equipment or production areas with different requirements.
Utilities, contractors and multiple sites
Collect the relevant site specifications before ordering. A common uniform appearance should not conceal differences in required ratings or additional PPE.
Washing, inspection and replacement
Keep care instructions with the clothing
Follow the care label for temperature, detergents, drying and any wash-cycle limits. Do not use bleach, softeners or other treatments unless the manufacturer permits them. Arrange suitable cleaning for the type of contamination involved.
Keep garments clean and stored correctly; dirt and contamination can reduce protective performance.
Check before use
Inspect fabric, seams, closures and reflective material. Remove damaged, heavily worn, contaminated or arc-exposed garments from service pending assessment under the manufacturer’s instructions.
Use only approved repairs and alterations. Plan spare garments so laundering and replacements do not encourage unsuitable substitutions.
AOS Workwear Supplies
Arc flash clothing supply for businesses and teams
Bring your approved specification to AOS and turn it into a practical purchasing list. We can discuss quantities, sizes, available product options and repeat supply alongside your wider workwear requirements.
Bulk and repeat purchasing
Ask about a team quotation, bespoke pricing for regular requirements and applicable quantity breaks. Share your preferred product references and expected replacement needs so we can quote accurately.
Explore business purchasing benefitsCompany branding—with suitability checked
Contact us before requesting logos or personalisation on protective clothing. The garment manufacturer must permit the method, materials, position and size; ordinary embroidery or print should not be assumed suitable for arc-rated PPE.
Explore workwear & branding servicesFor a useful quotation, send us:
Your required standards and arc rating, garment types or product codes, quantities by size, delivery postcode and required date. Include any approved layering requirements and branding request.
Our supply team can help with product information and sourcing; the competent person responsible for your electrical safety must approve the protection required for the task.
Arc flash clothing: your questions answered
What is the difference between arc flash clothing and flame-resistant clothing?
Arc-rated clothing has evidence of performance against electrical arc thermal hazards. Flame resistance alone does not establish an arc rating. Check the garment’s declared standards and results rather than relying on an FR description.
Which arc flash rating do I need?
Use the requirement established through your employer’s competent task-specific assessment. It should identify the applicable performance measure and protection needed. Neither voltage nor job title alone is enough to select a rating.
Is APC 2 the same as CAT 2?
No. APC 2 is a box-test arc protection class. CAT 2 refers to a different category scheme. Do not substitute one for the other or convert an APC class directly into a cal/cm² rating.
Can I add the ratings of two arc flash garments together?
No. Use the manufacturer’s test evidence for the exact layered system. Individual garment ratings cannot simply be added to establish the protection of an outfit.
Do arc flash trousers and a top have to be worn together?
Wear the complete clothing system specified for your task. Separates need compatible performance and adequate coverage, including overlap during movement. A top’s rating does not establish protection for uncovered areas or another garment.
Does arc flash clothing protect against electric shock?
An arc thermal rating does not establish electrical insulation or shock protection. The task assessment must address shock separately and specify any additional suitable equipment and working precautions.
Can I wash arc flash clothing?
Reusable garments must be cared for in accordance with their own instructions. Check permitted washing and drying methods, restrictions on chemicals and any stated service-life or wash-cycle limits. Inspect before reuse.
Can AOS add our company logo?
Ask us to check the selected garment first. Branding is subject to the manufacturer’s permitted methods and restrictions so it does not compromise protective performance or certification.
Can we order mixed sizes for a team?
Yes—send the product references or approved specification, quantities by size and delivery requirements for a quotation. Check the size chart for each garment rather than assuming all ranges fit alike.
Are arc flash suits the same as ordinary boilersuits?
No. “Boilersuit” describes a garment style, not its protective performance. Choose a coverall with the arc protection required by your specification. A category name alone does not establish a complete switching suit system.
How do I choose sizes for a team order?
Use the size chart for the selected product and collect each wearer’s measurements before ordering. Check chest, waist and leg measurements as relevant, and allow for the layers specified for the task. Send us a list of product references and quantities by size if you would like a team quotation.
One replacement or a complete team
Find your arc flash clothing at AOS
Browse the range, or send us your approved specification for help putting together your order.
Further reading
For safety management and PPE selection, refer to your competent adviser and manufacturer’s instructions. These resources explain the principles behind this page.
IET: arc flash risk managementHSE: selecting and using PPEIEC: open-arc testingHSE: PPE maintenance
